30 a ac/dc current probe TCP0030A datasheet TCP0030A is a high-performance, easy-to-use ac/dc current probe designed for use and direct connection to oscilloscopes with the tekvpi ? probe interface. this ac/dc current measurement probe provides greater than 120 mhz of bandwidth with selectable 5 a and 30 a measurement ranges. it also provides exceptional low-current measurement capability and accuracy to current levels as low as 1 ma, important for meeting today's challenging current measurement needs. key features easy-to-use and accurate ac/dc current measurements intelligent communication with tekvpi ? oscilloscopes provides: units scaling and readout. automatic, on-screen readout of amps and magnitude. manual setup is not required. hand calculation from volts to amps is unnecessary push button degauss and autozero functionality probe status and diagnostic indicator leds remote gpib/usb probe control split-core construction allows easy circuit connection high accuracy with typically less than 1% dc gain error low noise and dc drift 3rd party safety certification key performance specifications dc to >120 mhz bandwidth 30 a rms maximum current capability 50 a peak pulse current capability high accuracy with typically less than 1% dc gain error accurately measures current levels as low as 1 ma applications power supplies semiconductor devices power inverters/converters electronic ballasts industrial/consumer electronics mobile communications motor drives transportation systems www.tektronix.com 1
specifications all specifications apply to all models unless noted otherwise. electrical characteristics bandwidth dc to 120 mhz rise time 2.92 ns maximum dc current 30 a maximum rms current 30 a maximum peak pulse current 50 a maximum bare wire voltage 150 v cat ii, (insulated wire 300 v cat ii) sensitivity 1 ma (on oscilloscopes that support 1 mv/div setting) dc accuracy 1% typical 3% warranted maximum amp-second product 500 a*s (in 30 a range) insertion impedance 1 m at 10 khz 3.5 m at 100 khz 0.08 at 1 mhz 0.15 m at 10 mhz 0.7 at 100 mhz 0.85 at 120 mhz signal delay 14.5 ns current ranges 5 a and 30 a power requirements TCP0030A is powered directly by oscilloscopes with the tekvpi ? interface. note: for best support, download and install the latest version of the oscilloscope software from www.tek.com. physical characteristics probe head length 20 cm (7.77 in) width 1.6 cm (0.625 in) height 3.2 cm (1.25 in) maximum conductor size 5 mm (0.197 in) cable length 200 cm (79 in) shipping weight 1.55 kg (3.44 lb) datasheet 2 www.tektronix.com
emc environment and safety temperature operating 0 c to 50 c (32 f to 122 f) nonoperating -40 c to +75 c (-40 f to 167 f) humidity operating 5% to 95% relative humidity (rh) at up to +30 c; 5% to 85% rh above 30 c up to +50 c, noncondensing nonoperating 5% to 95% relative humidity (rh) at up to +30 c; 5% to 85% rh above 30 c up to +75 c, noncondensing altitude operating up to 3,000 m (10,000 ft.) nonoperating up to 12,192 m (40,000 ft.) compliance labeling ce (european union), weee (european union) ordering information models TCP0030A ac/dc current probe standard accessories instruction manual 071-3006-xx probe ground lead - 6 in. length 196-3120-xx nylon carrying case 016-1952-xx recommended accessories current loop, 1 turn, 50 with bnc connector used for performance verification order 067-2396-00 30 a ac/dc current probe www.tektronix.com 3
warranty one year parts and labor. service options opt. c3 calibration service 3 years opt. c5 calibration service 5 years opt. d3 calibration data report 3 years (with opt. c3) opt. d5 calibration data report 5 years (with opt. c5) opt. r3 repair service 3 years (including warranty) opt. r3dw repair service coverage 3 years (includes product warranty period). 3-year period starts at time of instrument purchase opt. r5 repair service 5 years (including warranty) opt. r5dw repair service coverage 5 years (includes product warranty period). 5-year period starts at time of instrument purchase opt. silv600 standard warranty extended to 5 years tektronix is registered to iso 9001 and iso 14001 by sri quality system registrar. datasheet asean / australasia (65) 6356 3900 austria 00800 2255 4835* balkans, israel, south africa and other ise countries +41 52 675 3777 belgium 00800 2255 4835* brazil +55 (11) 3759 7627 canada 1 800 833 9200 central east europe and the baltics +41 52 675 3777 central europe & greece +41 52 675 3777 denmark +45 80 88 1401 finland +41 52 675 3777 france 00800 2255 4835* germany 00800 2255 4835* hong kong 400 820 5835 india 000 800 650 1835 italy 00800 2255 4835* japan 81 (3) 6714 3010 luxembourg +41 52 675 3777 mexico, central/south america & caribbean 52 (55) 56 04 50 90 middle east, asia, and north africa +41 52 675 3777 the netherlands 00800 2255 4835* norway 800 16098 people's republic of china 400 820 5835 poland +41 52 675 3777 portugal 80 08 12370 republic of korea 001 800 8255 2835 russia & cis +7 (495) 6647564 south africa +41 52 675 3777 spain 00800 2255 4835* sweden 00800 2255 4835* switzerland 00800 2255 4835* taiwan 886 (2) 2722 9622 united kingdom & ireland 00800 2255 4835* usa 1 800 833 9200 * european toll-free number. if not accessible, call: +41 52 675 3777 updated 10 april 2013 for further information. tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. please visit www.tektronix.com . copyright ? tektronix, inc. all rights reserved. tektronix products are covered by u.s. and foreign patents, issued and pending. information in this publication supersedes that in all previously published material. specification and price change privileges reserved. tektronix and tek are registered trademarks of tektronix, inc. all other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies. 25 sep 2013 51w-19042-7 www.tektronix.com
|
